Gerbing Gyde 7V Men's S4 Camouflage Heated Gloves

Keep your hands warm and extend your time outdoors with the S4 Heated Gloves. This full-length gauntlet glove keeps the elements at bay and premium insulation locks the heated warmth in for as long as you need. A Cyberian Cordloc™ system keeps the glove secure and the touchscreen compatible index finger allows you to use your smartphone anytime. Control the temperature via the three-level silicone switch built into the glove. 

Gerbing Gyde Heated Gloves Include:

• 2pc - 7V Rechargeable Lithium-ion Battery Pack (25.16Wh)
• 1pc - Dual Battery Wall Charger
• Detailed Instructions
• Gerbing Lifetime Warranty

Gerbing Gyde S4 Heated Glove Features:

• Premium twill outer shell with Cyberian Cordloc system
• TPU molded cinch strap
• Chamois Thumb and goggle squeegee
• Three-level silicone switch
• AQUATEX breathable water-resistant membrane
• Primaloft insulation with 270 grams on top of hand and 170 grams on palm
• Equipped with (2) dual mode 7 volt battery and a dual wall charger
• Touchscreen compatible index finger

Battery has 4 heat-settings as indicated by lights and Heat Times:

• 100% (4 red/blue lights) - 2 Hours
• 75% (3 red/blue lights) - 3 Hours
• 50% (2 red/blue lights) - 5 Hours
• 25% (1 red/blue lights) - 8 Hours
• Blue Sync Mode for Glove Onboard Button Control

Charging Battery:

• We recommend charging overnight for first charge.
• Charge 100% before use (a full charge takes about 3 hours).
• A red light will appear on wall charger when charging.
• The red light will change to green when charged.
• Maintain at least 25% power when battery is not in use. This practice will prolong the life of any 7V battery.

Each heated glove features an on-board temperature control button that regulates the temperature with three optimum heat levels. The 7.4V lithium battery is secured in a pocket on the top side of the gauntlet for increased freedom of motion during almost any outdoor activity.

Instructions for Silicone Switches:

• Step 1: Plug in fully charged battery.
• Step 2: Switch will cycle through settings, this indicates switch has power and can now be used.
• Step 3: To power on, push and hold down button for 2-3 seconds until the switch illuminates.
• Step 4: To change power setting, tap button to cycle through levels.
• Low = Green
• Medium = Yellow
• High = Red
• Step 5: To power off, push and hold down button until light goes out.

G0715M-GLV-151-340-10966 811629021310 G0715M-GLV-151-340-10971 811629021303 G0715M-GLV-151-340-10976 811629021297 G0715M-GLV-151-340-10981 811629021280 G0715M-GLV-151-340-10986 811629021273